Skip to content

TREAT VIBRATION & STRUCTURE-BORNE SOUND WITH REGUPOL VIBRATION

REGUPOL vibration is available in six different types, each designed for a specific load range. The REGUPOL vibration series can be used for a variety of applications, including foundations, HVAC equipment, machines, pools, and gyms. Natural frequencies as low as 7.5 Hz can be achieved depending on the load, material thickness, and REGUPOL vibration type. Our team is by your side to assist you in product selection, planning, design, and installation.

REGUPOL VIBRATION Range

REGUPOL vibration 300

  • Thickness: 17mm or 25mm (11/16" or 1")
  • Max static load: 0.05 N/mm2   (7.3 psi)
  • Available in rolls

REGUPOL vibration 450

  • Thickness: 25mm or 50mm (1" or 2")
  • Max static load: 0.12 N/mm2 (17.4 psi)
  • Available in sheets, 610mm x 610mm (2' x 2')

REGUPOL vibration 480

  • Thickness: 15mm (9/16")
  • Max static load: 0.15N/mm2 (21.8 psi)
  • Available in rolls

REGUPOL Vibration 550

  • Thickness: 15mm (9/16")
  • Max static load: 0.30 N/mm2 (43.5 psi)
  • Available in rolls

REGUPOL vibration 800

  • Thickness: 10mm (3/8")
  • Max static load: 0.80 N/mm2 (116 psi)
  • Available in rolls

REGUPOL vibration 1000

  • Thickness: 10mm (3/8")
  • Max static load: 1.50 N/mm2 (217.6 psi)
  • Available in rolls

REGUPOL vibration Range

The REGUPOL vibration series is made of rubber fibers,  granules, and polyurethane. The material is extremly resilient and durable. REGUPOL vibration has been used successfully worldwide for vibration isolation of machinery and buildings since the early 90s. Even after decades of use, its properties only change marinally. 

The REGUPOL vibration series has a wide load range and provides a constant natural frequency. Each material type is best suited for its specified load range. Exceeding the maximum load limit leads to progressive spring characteristics, but not to material failure. In fact, the rated value for maximum load capacity is 150% to 200% the specified limit.